Product Price :Get Latest Price
Operating data for mildsteel cutting | |||
Nozzle size Type A | Thickness to Be Cut | Pressure of Oxygen | |
mm | Inches | In mm | In kgf/cm |
0.79 | 1/32" | 3 6 | 1.5 |
1.19 | 3/64" | 6 9 | 3 |
1.59 | 1/16" | 19 75 | 4 |
1.59 | 1/16" | 75 100 | 5 |
1.98 | 5/64" | 100 150 | 6 |
2.38 | 3/32" | 150 200 | 7.5 |
2.87 | 7/64" | 200 250 | 8 |
3.17 | 1/8" | 250 300 | 8 |
The above DATA figures are intended to serve as a guide only and may very to suit local conditions, such as flame setting, material condition, welder''s experience etc.
Manual Cutting blow pipe, is a study, well balanced, injector type, capable of cutting mild steel up to a thickness of 300mm. It can be used either with dissolved Acetylene in cylinder or with low pressure generated Actylene. With a suitable nozzle, it can be used with LP Gas also. It special designed body and head are of forged brass, eliminating casting porosity, ensuring total safety and backfire are almost completely eliminated with a specially designed injector.
Explore More Products
© Balaji Solutions Engineering. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited