CUTTING TORCH

The above DATA figures are intended to serve as a guide only and may very to suit local conditions, such as flame setting, material condition, welder''s experience etc.

Manual Cutting blow pipe, is a study, well balanced, injector type, capable of cutting mild steel up to a thickness of 300mm. It can be used either with dissolved Acetylene in cylinder or with low pressure generated Actylene. With a suitable nozzle, it can be used with LP Gas also. It special designed body and head are of forged brass, eliminating casting porosity, ensuring total safety and backfire are almost completely eliminated with a specially designed injector.

BSE ISO Introduces the safer and superior Nozzle Mixing Technology

• Much Safer
• Light weight but robust
• Withstand rough & tough usage
• Much easier cutting
• Used for gauging also by suitable nozzle

Body:

NM type 3 seated nozzle:

Weight of Cutter:

Head:

Oxygen & Fuel Gas Tubes:
Used 3 Nos. Seamless stainless steel tubes, ensure highly resistant to corrosion and long life

Cutting Lever:

Stainless steel lever, provided with a latch facility to avoid operator fatigue.

Handle:

Metallic, ensures longer life and much better appearance.

Control Knobs:

The Safety "Flash Back Arrester" is exclusively designed to eliminate every possibility of explosion or fire caused by flash backdue to any reason. The flash backarrester is useful for fitting on Gas Regulator & Welding, Heating, Cutting and Blow Pipe. This Safety device cut off the gasflow in case of flash back backfire.

It provides device to easy flow of gas during normal operation of Welding Cutting but seize fire as soon as fire reach to the fire arresting device provided there in. Beside it Non Return Value is also provided which locks the gas pressure if any adverse excess flow pressure occurs in device due to any reason. Non Return Value becomes normal as soon as flow come in its normal operation.

Availablity

For High Pressure Welding & Cutting Blow Pipe

CBPO - Cutting Blow Pipe Oxygen10 Kgf cm
CBPA-Cutting Blow Pipe Acetylene1.5 Kgf cm

For Gas Pressure Regulator

PRO Pressure Regulator Oxygen 10 Kgf cm

PRL Pressure Regulate LPG 1.5 Kgf cm

Welding Blow Pipe

Suitable for Medium and Heavy Gas Welding applications. An Ideal blowpipe for welding various metals in general workshop use and general heating purpose. It is supplied with tips nozzles suitable for welding mild steel in the range of 1.00 mm. to 12mm thickness. The blowpipe is supplied complete with hose connections, spanner, operating data card and 6nos.

Shower Type Heating Torch

• Showertype heating torch 1 mtr. long to be used with Oxy fuel gas for Heaving Duty Heating Purpose in workshower.

• Additional tips Technical Duties Nozzle may besupplied on demand

• BSE High Pressure Blowpipe is ISI marked and is made using thefinest raw materials

• Both the body and legs are forge from extruded brass rod to remove any chances of casting porosity

• The special injector type design ensures continuous and trouble free service

• The low pressure welding blowpipe can be used for Welding in shop floors, automobile repair workshops and other general application.

• The Blowpipe can be used with either LPG or Acetylene as the Fuel Gas

• Low power consumption
• Robust construction
• No maintenance

• Brand: B.S.E
• Model NO: BSE-HT14

• Quantity: 20 pcs/carton
• Quality: as per “CE”